2 Aug 2012

KTM Duke: great little big bike (with a few modifications)

I am really pleased with this new KTM bike of mine. Time will of course tell, but it could be one of the best machines I have yet owned. At least it is probably the one best suited to the main use that I make of motorcycles: going quite fast on small roads, for variable distances. The roads around where I spend as much time as I can, in South-West France, are a bit like this....




Or, looking in the other direction to the next bend and with the setting sun behind one, this...



In other words there are plenty of bends and very little traffic. One has to be on the look out for occasional gravel and the odd tractor, but late evening on weekdays is usually pretty good once harvest is over. Riding this landcape with the 690 Duke is a permanent buzz as the bike is so light and responsive (power/weight ratio is all), is a leech on these roads, and can suffer my occasional (frequent?) line errors and last minute adjustments willingly and without going crazy. It also has good brakes and (if you need it) ABS on them.
I am increasingly thinking that modern sports bikes, while great fun on a track and if you are stone crazy, have far too much power for the roads we ride. In addition, as Colin Chapman (of Lotus fame) said when asked what should be added to a car: "add lightness". 


I am getting used to the orange frame, and its somewhat angular looks, both of which I initially found rather garish. Black on the rest keeps things within reason, or maybe this is a case of love being blind. After all, I got used to the rather stange looks of my Ducati Multistrada.


I have changed the original and rather bulky silencer for an after-market thingie produced in Spain and sold to me be a very efficient company called Silverstone Motor here in France. You can just see it in this pic but I will get back to this topic in a while.


As I said in my first report on riding this machine for a full day up from Lyon to Paris on minor roads, the first thing to change was the seat. The orginal seat is fine for a short journey, but it has a kind of roll at the back end of the rider's part (the passenger number is a separate pad and I haven't seriously tested that bit yet) that pummels your coccyx over a distance, making it quite hard to walk the next day! So I had this thing fitted from the very comprehensive "Powerparts" catalogue of the manufacturer. Now why can't they just fit a proper seat in the first place?




As you can see, the roll blends in with the rear seat so one can slip back if needed. Anway, a full day's riding with this new seat caused me no pain and so it stays. What else? A couple of mods that I had done before the bike was delivered. Although this is hardly a high-speed cruiser, it will hold more than legal cruising speeds on the motorways without problems (not that I use such roads much on a bike), so I had a small screen/wind deflector fitted. Seems to work fine, but then I haven't tried riding the KTM without it!




Another couple of mods from tha start were handguards and heated grips. Haven't needed the latter much yet, but they might keep me on the road for longer into this winter. However the handguards have probably already saved me a broken finger (and brake lever) when some f**ckwit in a car pulled out to overtake when I was already overtaking him, failing to use his rearview mirror, which he probably lost in the proceeds. You can just about see the temperature control for the heated grips and the mounting for the GPS I occasionally use as well. These KTM handguards are well made, as I experienced. They have an alumiuim brace that joins to the handgrip, this protecting hands and levers.




Now for the (partially) esthethic mods. Well, for now, I just removed the garish stickers on the headlight fairing and the tank, leaving the more discreet one on the air filter casing. And the original silencer is too bulky and makes the bike sound like a sewing machine when at low speed. I am not in favour of hugely noisy bikes, but I do like my machines to sound like they are alive. I thought about the Akropovic number offered in the KTM Powerparts catalogue, but it seemed very expensive. So I looked around on this marvellous tool called the web and found this little twin-exit number, produced in Spain by a company called IXRace. Easy to fit and it sits in tighter than the original part, as well as being much smaller and shorter. I like the curves too. The sound is not a lot bigger, but perhaps a tad deeper and crisper. I see there are baffle plates on the end of the exits. Might just play around with them a bit later. Here is a picture and a video...







No other mods have been made for now. Getting to know the bike and enjoying it a lot. I was initially concerned about the lack of flexibility of the motor, which clanged and banged under 3000 rpm. But that is changing now that is has been run in properly (2000 kms on the clock). Noticed a couple of really nice details. It has a gear indicator, which I have not had on a bike before and find it quite useful on the small roads that turn a lot, even if I tend to play it by ear and the rev counter. Also, when the fuel tank goes onto reserve (I haven't yet worked ou how much is left in there), the computer tells you how many kilometres you have been running since you went onto reserve. It also has two trip meters, which I suppose could be useful one day. All of this is electronic of course and you have to push buttons on the speedo block, taking one hand off the bars to change from one set of information to another, but, hey, what's the problem? 


Ride safely, within reason...

4 comments:

  1. It must have been an incomparable experience riding the 690 Duke along the countryside with all those sights! That is just the essence of motorcycling. The one thing that KTM Motors has never lost, even after all the structural changes they made, is their attention to the elements to achieve a dynamic riding experience. I think the orange frame of the 690 Duke is a cool accent, especially at night! :D

    ReplyDelete
  2. Indeed Erik. I continue to enjoy riding this bike enourmously. Off again this weekend.

    ReplyDelete
  3. Hi David,
    I too am a proud owner of a 2012 690 Duke. I often get the roving eye (Monster 796, 2013 Hypermotard, Brutale 800 to name a few) but I remain more than satisfied with my Duke for the riding that I do, which is very much similar to your own though not on anything approaching the beautiful topography as your own. I did get to take it to the Pyrenees last summer and it was outstanding. You couldn't have paid me to ride a different bike. I'm hopping the motorail down to Bolzano in the Dolomites at the end of June.

    I'm interested in your mods. Does the Powerparts seat come in 2 parts and does it raise the actual seat height at all? I'm vertically challenged at 5-8 so need all the help I can get.

    On another part of your site you refer to the tank bag. Is this also a KTM Powerpart offering? I ask as yours seems to be a decent size and the one I've seen in the shop is tiny. When I went to the Pyrenees last summer I just strapped a back-pack to the tank and although it did the job but it was cumbersome. It would be good t0 get something more dedicated.

    The only mod I've made (and was from day 1) was to add standard black hand-guards. We're very much aligned there. I think they look great and a bit of a homage to its off-road roots.

    Finally, What sort of mpg do you get? I read in Bike magazine a few months ago that they tested at 70mpg. I saw in their mag yesterday that this has now been revised t0 52mpg (don't understand that one). I believe mine is around 50. Would be good to get someone else's opinion.

    Steve




    ReplyDelete
    Replies
    1. Hi Steve.
      Thanks for your input. Pyrenees must be good on this bike and you will greatly enjoy the Dolomites!
      Yes, the tank bag is the standard KTM offering and it it small but well designed. I have also just bought the KTM side bags and support and will be fitting them this weekend for some coming trips that will need extra carrying capacity. I also use a waterproof roll bag that I hook onto the pillion seat, bought in an army surplus store, and, if necessary, a Kriega backpack (these are excellent by the way).
      The KTM Powerpart seat is an improvement on comfort, but I would not say that it will lower your ride any. What it does achieve is to rid you of that roll at the back of the standard seat that I found punishing for the coccyx after a while on the road.
      On fuel consumption, I have to admit to not having calculated this yet. Maybe this is because it is lower that what I was getting on my Ducati Multistrada before?
      I can recommend the rear splashguard that keeps the dirt off the rear shock and your own rear end.

      Delete